标签归档:10G CWDM network

How to Build 10G CWDM Network

As a passive technology, CWDM allows for any protocol to be transported over fiber optic link at specific wavelengths. CWDM technology is a cost-effective and simple method to increase the capacities of fiber optic network, by using different wavelengths to carry different signals over a single optical fiber. The wide deployment of CWDM network is greatly driven by its affordable cost.

What Is Need for A 10G CWDM Network?

The deployment of a 10G CWDM network is relaying on the exiting fiber optic network. Adding some components on the existing network can largely increase its capacity for data transmission. Here will introduce the key component and an important step during 10G CWDM network deployment.

CWDM Mux/Demux
A Key Component—CWDM Mux/Demux

A key component should be deployed is CWDM Mux/Demux, which combines different wavelength signals from different optical fibers into a single optical fiber, or separates different wavelength signals coming from a single optical fiber to separate optical fibers. The Channel number of a CWDM Mux/Demux is an important factor to divide this device. Standards have identified 18 CWDM Channels. Most of the CWDM Mux/Demux are provided with Channel number range from 2 to 16. However, FS.COM provides a 18-Channel CWDM Mux/Demux which can increase capacity of CWDM network to the most. CWDM Mux/Demuxs also come into a variety of package form factors. The most commonly used are LGX design, rack design and pigtail design.

CWDM Cabling
An Important Step—Connecting CWDM Mux/Demux With 10G Switch

Connecting CWDM Mux/Demux with a 10G switch, is the most important step to build a 10G CWDM network. In simple, to add more devices on the fiber optic network by CWDM technology is to connect the CWDM Mux/Demux with the 10G switches which are linked to the end users. To link CWDM Mux/Demux with the switches, fiber patch cable and 10G CWDM SFP+ transceiver are needed. 10G CWDM SFP+ transceiver should be installed on the switch SFP+ port (some switches use XFP port, then 10G CWDM XFP transceiver is required). Then a length of fiber patch cable should be used to link the transceiver and CWDM Mux/Demux.

CWDM SFP+

How to Select to Right 10G CWDM SFP+ Transceivers?

Choose the Right Working Wavelength: To ensure the right connection, the specific wavelength port should be connected to the same wavelength CWDM SFP+ transceivers. For example, the port on the CWDM Mux/Demux marked with 1270 nm, should be connected to a CWDM SFP+ transceiver that working over wavelength of 1270 nm. As there are 18 different CWDM wavelengths, 10G CWDM SFP+ transceivers that are provided in the market also can 18 different versions for these wavelengths.

Choose the Compatible CWDM SFP+: It is common sense that the fiber optic transceiver should be compatible with the switch which it works on. For instance, if you are using a Cisco switch, the fiber optic transceivers that you used with this switch should be original Cisco transceivers or Cisco compatible transceivers which are provided by third party vendors. The latter is usually the choice of many companies, this is because third party transceivers are usually more cheap than the original brand transceivers. Fiber optic transceivers provided by third party vendor like FS.COM are all fully tested on original brand switch to ensure their compatibility and quality. What’s more, most of FS.COM fiber optic transceivers support same day shipping. Select the right SFP do not only cut your cost and time, but also provide high network performance.

Choose the Transmission Distance According to Your Needs: CWDM network is usually deployed for long distance transmission. Thus the 10G CWDM SFP+ transceiver that are provided in the market usually support transmission distance longer than 20 km, some can support link length up to 80 km or more. You can select the 10G CWDM SFP+ according to your requirements.

Here list the generic whole band 10G CWDM SFP+ fiber optic transceivers that support link length of 20km, 40km and 60km. If you need the brand compatible CWDM SFP+, kindly contact sales@fs.com or visit FS.COM for more details.

Wavelength 20km CWDM SFP+ 40km CWDM SFP+ 60km CWDM SFP+
1270 nm 44170 44363 44743
1290 nm 44171 44364 44744
1310 nm 44172 44365 44745
1330 nm 44173 44366 44746
1350 nm 44269 44367 44747
1370 nm 44270 44368 44748
1390 nm 44271 44369 44749
1410 nm 44272 44370 44750
1430 nm 44273 44371 44751
1450 nm 44274 44372 44752
1470 nm 44299 44550 44827
1490 nm 44300 44551 44828
1510 nm 44301 44552 44829
1530 nm 44302 44553 44830
1550 nm 44303 44554 44831
1570 nm 44304 44555 44832
1590 nm 44305 44556 44833
1610 nm 44306 44557 44834
Conclusion

With the improvement of technology and market, the cost of CWDM network has decrease a lot. To build a 10G CWDM network is affordable to most companies. For full series of CWDM network Solutions, please visit the following link: WDM Solution